-
SD200 Desander
SD-200 Desander is a mud purification and treatment machine developed for wall mud used in construction, bridge pile foundation engineering, underground tunnel shield engineering and non excavation engineering construction. It can effectively control the slurry quality of construction mud, separate solid-liquid particles in mud, improve the pore forming rate of pile foundation, reduce the amount of bentonite and reduce the cost of slurry making. It can realize the environmental transport and slurry discharge of mud waste and meet the requirements of environmental protection construction.
-
VY1200A static pile driver
VY1200A static pile driver is a new type of foundation construction machinery which adopts full hydraulic static pile driver. It avoids the vibration and noise caused by the impact of the pile hammer and the air pollution caused by the gas emitted during the operation of the machine. The construction has little impact on the nearby buildings and residents’ life.
Working principle: the weight of the pile driver is used as the reaction force to overcome the friction resistance of the pile side and the reaction force of the pile tip when pressing the pile, so as to press the pile into the soil.
According to the market demand, sinovo can provide 600 ~ 12000kn pile driver for customers to choose, which can adapt to different shapes of precast piles, such as square pile, round pile, H-steel pile, etc.
-
SD250 Desander
Sinovo is a desander manufacturer and supplier in China. Our SD250 desander is mainly used for clarifying mud in circulation hole.
-
YTQH1000B Dynamic compaction crawler
YTQH1000B Dynamic compaction crawler crane is the specialized dynamic compaction equipment. According to the market demand basing on the several years’ experience of manufacturing the engineering hoisting, compacting and dynamic compaction equipment.
-
SD500 Desander
SD500 desander can cut down construction cost, reduce environmental pollution and increase efficiency. It is one of the necessary equipment for foundation construction. It can Increased separation capacity in the fine sand fraction bentonite, supported grad work for pipes.
-
ZJD2800/280 hydraulic reverse circulation drilling rig
ZJD series full hydraulic drilling rigs are mainly used for the drilling construction of pile foundations or shafts in complex formations such as large diameter, large depth or hard rock. The maximum diameter of this series of drilling rigs is 5.0 m, and the deepest depth is 200m. The maximum strength of the rock can reach 200 Mpa.
-
ZR250 Mud Desander
ZR250 mud desander is used to separate the mud, sand and gravel discharged by the drilling rig, part of the mud can be pumped back to the bottom of the hole for reuse.
-
Non-coring Bits
SINOVO Diamond Non-coring Bits For Metal Drilling And Core Drilling With CE/GOST/ISO9001 Certificate
-
Core Drill Bit
Diamond Core Drill Bit For Metal Drilling And Core drilling
-
Kelly bars for rotary drilling rig
- Interlocking kelly bar
- Friction kelly bar
-
CFA for for rotary drilling rig
1.Hopper for Concrete Pipe Hopper Diameter(mm) Height(mm) Weight(kg) 408 950 70 508 850 75 658 870 91 758 970 123 1058 1250 207 Conduit Length(mm) Weight(kg) 1000 49 2000 86 3000 123 4000 160 5000 197 6000 234 Hopper 2 D H KG m3 1500 1270 179 1 1500 1670 235 1.5 1860 1520 263 2 2000 1350 288 3 Conduit 2 L1 KG L2 KG ... -
B1200 Full Hydraulic Casing Extractor
Although the hydraulic extractor is small in volume and light in weight, it can easily, steadily and safely pull out the pipes of different materials and diameters such as condenser, rewaterer and oil cooler without vibration, impact and noise.
professional supplier of
construction machinery equipment
- info@sinovogroup.com
- +86-10-51908781(9:00-18:00)+86-13801057171(other time)