professional supplier of
construction machinery equipment

Products

  • SD220L Crawler full hydraulic pump reverse circulation drilling rig

    SD220L Crawler full hydraulic pump reverse circulation drilling rig

    SD220L Crawler full hydraulic pump reverse circulation drilling rig is mainly used for drilling vertical pile foundations in large-diameter, pebble, hard rock and other complex strata. Its maximum diameter is 2.5m (rock), the drilling depth is 120 m, and the maximum strength of rock socketed can reach 120MPa, which is widely used in the drilling construction of pile foundations in ports, wharfs, bridges in rivers, lakes and seas with the advantages of fast footage and high automation, and saves labor and construction costs.

  • SRC 600 Top-drive type fully hydraulic Reverse circulation drilling rig

    SRC 600 Top-drive type fully hydraulic Reverse circulation drilling rig

    Back cycle series multi-function drilling rig is a new type, high efficiency, environmental protection, multi-function track drilling rig, it adopts the latest foreign RC drilling technology, rock dust can be effectively collected through the dust collector to avoid environmental pollution. It can also be collected by cyclone separator, which can be used for sampling and analysis of geological exploration department. It is the preferred equipment for geological exploration and drilling holes and other deep holes.

  • SQ-200 REVERSE CIRCULATION DRILLING RIG

    SQ-200 REVERSE CIRCULATION DRILLING RIG

    SQ-200 reverse circulation drilling rig can be used for low and middle hardness formation of high-speed rail, bridge, wind power, pylons foundation work, also can be used in the water well drilling and bore pile.

  • TR35 Rotary Drilling Rig

    TR35 Rotary Drilling Rig

    TR35 can move in very tight locations and limited access areas, equipped with special telescopic section mast to ground and reach the working position of 5000mm. TR35 is equipped with interlocking Kelly bar for drilling depth 18m.  With the mini undercarriage width of 2000mm,  TR35 can be for easy work on any surface.

  • SDL-80ABC Series Drilling Rig

    SDL-80ABC Series Drilling Rig

    A

    BC

    SDL series drilling rig is top drive type multifunctional drilling rig which our company design and manufacture for complex formation according to market request.

  • SDL-60 Top Drive Multifunction Drilling Rig

    SDL-60 Top Drive Multifunction Drilling Rig

    SDL series drilling rig is top drive type multifunctional drilling rig which our company design and manufacture for complex formation according to market request.

  • SNRT-200 Water Well Drilling Rig

    SNRT-200 Water Well Drilling Rig

    SNRT-200 Water Well Drilling Rig is lightweight, high efficient, multi-functional drilling rig, which can use air, foam or mud rotary for drilling according to different textures. It is widely used in industrial and agricultural water conservancy projects, such as drilling wells, testing wells or other exploration holes , in particular in drilling geothermal heating hole, it can also meet the engineering basis for reinforcement, loose gravel drilling rock formation connected with a variety of engineering requirements.

  • Long Auger Drilling Rig

    Long Auger Drilling Rig

    Long auger drilling rig is a new product which is based on domestic and international advanced technology. It is a construction foundation equipment, which is not only applied for piling foundation in housing construction, but also for the traffic, energy engineering and soft base enhance, etc., Currently CFG is listed as national new method and national construction standard.

    lt can finish the pile in one time, perfuse pile at site and also finish the operation of placing the steel cage. Efficiency, high quality and low cost are the main advantages of this machine.

    Simple structure ensures flexible move, easy operation and convenience maintenance.

    It is applicable for clay soil, silt and fill, etc. It can pile in different complicated geological conditions such as soft soil, draft sand formation, sand and gravel layers, with groundwater and so on. Besides, it can construct cast-in-place pile, hi-pressure grouting-pile, grouting ultra-fluidized pile, CFG composite pile, pedestal pile and other ways.

    There is no vibration, noise and pollution during construction. It’ s an excellent equipment for infrastructure construction.

  • SPA8 PLUS  Hydraulic Pile Breakers

    SPA8 PLUS Hydraulic Pile Breakers

    The leading hydraulic pile breaker with five patented technologies and adjustable chain, it is the most efficient equipment to break the foundation plies. Due to the modular design, the pile breaker can be used for breaking different sizes of pile. Equiped with the chains, it can work with different equipments to break piles.

     

  • TR80S Low Headroom  Full Hydraulic Rotary Drilling Rig

    TR80S Low Headroom Full Hydraulic Rotary Drilling Rig

    Performance features:

    ●Selected powerful original American Cummins engines and precise hydraulic and electrical control systems to fully utilize its working capabilities;

    ●The working height is only 6 meters, equipped with a large torque output power head, and the maximum drilling diameter is 1 meter; very suitable for bored pile construction indoors, in factories, under bridges and in sites with limited height.

    ●The self-made special chassis for SINOVO rotary drilling rigs perfectly matches the power system and the hydraulic system. The most advanced load sensing, load sensitive and proportional control hydraulic system makes the hydraulic system more efficient and energy-saving;

  • TR210D Rotary Drilling Rig

    TR210D Rotary Drilling Rig

    TR210D Rotary drilling rig is mainly used in the construction of civil and bridge engineering, it adopts advanced intelligent electronic control system and loading sensing type pilot control hydraulic system, the whole machine is safe and reliable. It’s suitable for the following application; Drilling with telescopic friction or interlocking Kelly bar –standard supply; Drilling with CFA drilling system – option supply;

     

     

  • SR526D SR536D Hydraulic Piling Rig , Rotary Piling Machine With Crawler Chassis

    SR526D SR536D Hydraulic Piling Rig , Rotary Piling Machine With Crawler Chassis

    1. Driving shed reinforced structure strong and shock resistant.
    2. Max stroke of hammer can recache 5.5m (Standard pilling stroke height up to 3.5 meters)
    3. Guide rail equipped with double-row; chain makes machine high safety coefficient.
    4. High frequency hydraulic hammer with borer pole diameter 85mm impact power up to 1400 joules.
    5. Equipped with angle digital indicator to adjust angle quickly.
    6. Guard rail vertical to the ground when piling, can most reduce the effect of vibration on pile perpendicularity.
    7. Driving shed reinforced structure strong and shock resistant.
    8. High control accuracy of operation valve Easy and smooth.
    9. The crawler chassis is equipped with protection and make safety first.
123456 Next > >> Page 1 / 14