Wholesale Price 5 Inch Diamond Core Drill Bit - Core Drill Bit – Sinovo Detail:
Technical Parameters
Products | Problems | Settlement |
Diamond core bit | 1. Size, and/ or technical parameters (matrix etc.) are different Replace from the requirements of client’s purchase order. | Replace |
2. Thread can not fit clients barrel. | Repair or replace | |
3. Break down a piece from matrix, and the volume of the piece exceed 2mm x 2mm x2mm, and such break is not Replace caused by drilling. | Replace | |
4. Matrix falling not caused by drilling. | Replace or return | |
5. Groove on matrix caused by manufacturer. | Replace or return | |
6. Drilling speed is obvious slower than congener products caused by manufacturer. | Replace, and each item quantity does not exceed 3 pieces. |
|
7. Bit life is obvious short caused by manufacturer. | ||
8. Breaking down of matrix, falling matrix, groove and short bit life caused by operating reasons- drill rod sticking, premature failure of the bit crown and hole bottom not to be cleaned. | Be excluded from Quality Guarantee | |
9. Short bit life and abrasion caused by drilling machine, drilling techniques or parameters. | ||
10. Properly worn and the matrix is finished. | ||
11. Thread damaged and distortion made by operator. | ||
12. Body crack in drill. | Replace or return |
Dimensions of core bits
A-Gauge Core Bits | ||||||||||
Size | Outside diameter | Inside diameter | Availability | |||||||
inch | mm | inch | mm | IMP. | S.S. | P.C. | PDC | TSP | E.P. | |
WLA | 1.880/1.870 | 47.75/47.50 | 1.607/1.057 | 27.10/26.85 | Yes | Yes | Yes | Yes | Yes | Yes |
WLA-RSG | 1.895/1.885 | 48.13/47.88 | 1.067/1.057 | 27.10/26.85 | Yes | Yes | Yes | Yes | Yes | Yes |
AWG, AX | 1.880/1.870 | 47.75/47.50 | 1.190/1.180 | 30.23/29.97 | Yes | Yes | Yes | Yes | Yes | Yes |
AWM | 1.880/1.870 | 47.75/47.50 | 1.190/1.180 | 30.23/29.97 | Yes | Yes | Yes | Yes | Yes | Yes |
AWT | 1.880/1.870 | 47.75/47.50 | 1.286/1.276 | 32.66/32.41 | Yes | Yes | Yes | Yes | Yes | Yes |
LTK48 | 1.880/1.870 | 47.75/47.50 | 1.394/1.384 | 35.40/35.15 | Yes | Yes | Yes | Yes | Yes | Yes |
B-Gauge Core Bits | ||||||||||
WLB | 2.350/2.340 | 59.69/59.44 | 1.438/1.428 | 36.52/36.27 | Yes | Yes | Yes | Yes | Yes | Yes |
WLB-RSG | 2.365/2.355 | 60.07/59.82 | 1.438/1.428 | 36.52/36.27 | Yes | Yes | Yes | Yes | Yes | Yes |
WLB-2.400 | 2.045/2.395 | 61.09/60.83 | 1.438/1.428 | 36.52/36.27 | Yes | Yes | Yes | Yes | Yes | Yes |
WLB3 | 2.350/2.340 | 59.69/59.44 | 1.325/1.315 | 33.65/33.40 | Yes | Yes | Yes | Yes | Yes | Yes |
BWG, BX | 2.350/2.340 | 59.69/59.44 | 1.660/1.650 | 42.16/41.91 | Yes | Yes | Yes | Yes | Yes | Yes |
BWM | 2.350/2.340 | 59.69/59.44 | 1.660/1.650 | 42.16/41.91 | Yes | Yes | Yes | Yes | Yes | Yes |
BWT | 2.350/2.340 | 59.69/59.44 | 1.755/1.745 | 44.58/44.32 | Yes | Yes | Yes | Yes | Yes | Yes |
LTK60 | 2.350/2.340 | 59.69/59.44 | 1.742/1.732 | 44.25/44.00 | Yes | Yes | Yes | Yes | Yes | Yes |
TBW | 2.350/2.340 | 59.69/59.44 | 1.785/1.775 | 45.34/45.09 | Yes | Yes | Yes | Yes | Yes | Yes |
N-Gauge Core Bits | ||||||||||
WLN | 2.970/2.960 | 75.44/75.19 | 1.880/1.870 | 47.75/47.50 | Yes | Yes | Yes | Yes | Yes | Yes |
WLN-RSG | 2.985/2.975 | 75.82/75.57 | 1.880/1.870 | 47.75/47.50 | Yes | Yes | Yes | Yes | Yes | Yes |
WLN-3.032 | 3.037/3.027 | 77.14/76.89 | 1.880/1.870 | 47.75/47.50 | Yes | Yes | Yes | Yes | Yes | Yes |
WLN2 | 2.970/2.960 | 75.44/75.19 | 2.000/1.990 | 50.80/50.55 | Yes | Yes | Yes | Yes | Yes | Yes |
WLN2-RSG | 2.985/2.975 | 75.82/75.57 | 2.000/1.990 | 50.80/50.55 | Yes | Yes | Yes | Yes | Yes | Yes |
WLN3, NWLTT | 2.970/2.960 | 75.44/75.19 | 1.780/1.770 | 45.21/44.96 | Yes | Yes | Yes | Yes | Yes | Yes |
WLN3-RSG | 2.985/2.975 | 75.82/75.57 | 1.780/1.770 | 45.21/44.96 | Yes | Yes | Yes | Yes | Yes | Yes |
WLN3-3.032 | 3.037/3.027 | 77.14/76.89 | 1.780/1.770 | 45.21/44.96 | Yes | Yes | Yes | Yes | Yes | Yes |
NMLC | 2.970/2.960 | 75.44/75.19 | 2.052/2.042 | 52.12/51.87 | Yes | Yes | Yes | Yes | Yes | Yes |
NWG, NX | 2.970/2.960 | 75.44/75.19 | 2.160/2.150 | 54.86/54.61 | Yes | Yes | Yes | Yes | Yes | Yes |
NWM | 2.970/2.960 | 75.44/75.19 | 2.160/2.150 | 54.86/54.61 | Yes | Yes | Yes | Yes | Yes | Yes |
NWT | 2.970/2.960 | 75.44/75.19 | 2.318/2.308 | 58.87/58.62 | Yes | Yes | Yes | Yes | Yes | Yes |
TNW | 2.970/2.960 | 75.44/75.19 | 2.394/2.384 | 60.80/60.55 | Yes | Yes | Yes | Yes | Yes | Yes |
H-Gauge Core Bits | ||||||||||
WLH | 3.770/3.755 | 95.76/95.38 | 2.505/2.495 | 63.63/63.38 | Yes | Yes | Yes | Yes | Yes | Yes |
WLH-RSG | 3.790/3.755 | 96.27/95.89 | 2.505/2.495 | 63.63/63.38 | Yes | Yes | Yes | Yes | Yes | Yes |
WLH-3.830 | 3.840/3.825 | 97.54/97.16 | 2.505/2.495 | 63.63/63.38 | Yes | Yes | Yes | Yes | Yes | Yes |
WLH-3.895 | 3.897/3.882 | 98.98/98.60 | 2.505/2.495 | 63.63/63.38 | Yes | Yes | Yes | Yes | Yes | Yes |
WLH3, WLHTT | 3.770/3.755 | 95.76/95.38 | 2.411/2.401 | 61.24/60.99 | Yes | Yes | Yes | Yes | Yes | Yes |
WLH3-RSG | 3.790/3.755 | 96.27/95.89 | 2.411/2.401 | 61,24/60.99 | Yes | Yes | Yes | Yes | Yes | Yes |
WLH3-3.830 | 3.840/3.825 | 97.54/97.16 | 2.411/2.401 | 61.24/60.99 | Yes | Yes | Yes | Yes | Yes | Yes |
WLH3-3.895 | 3.897/3.882 | 98.98/98.60 | 2.411/2.401 | 61.24/60.99 | Yes | Yes | Yes | Yes | Yes | Yes |
HMLC | 3.897/3.882 | 98.98/98.60 | 2.505/2.495 | 63.63/63.38 | Yes | Yes | Yes | Yes | Yes | Yes |
HWF-Long | 3.912/3.897 | 99.36/98.98 | 3.005/2.995 | 76.33/76.08 | Yes | Yes | Yes | Yes | Yes | Yes |
HWF-Short | 3.897/3.882 | 98.98/98.60 | 3.005/2.995 | 76.33/76.08 | Yes | Yes | Yes | Yes | Yes | Yes |
HWG, HX | 3.897/3.882 | 98.98/98.60 | 3.005/2.995 | 76.33/76.08 | Yes | Yes | Yes | Yes | Yes | Yes |
HWM | 3.897/3.882 | 98.98/98.60 | 3.005/2.995 | 76.33/76.08 | Yes | Yes | Yes | Yes | Yes | Yes |
HWT | 3.897/3.882 | 98.98/98.60 | 3.192/3.182 | 81.08/80.82 | Yes | Yes | Yes | Yes | Yes | Yes |
P-Gauge Core Bits | ||||||||||
WLP | 4.815/4.795 | 122.30/121.8 | 3.350/3.340 | 85.09/84.84 | Yes | Yes | Yes | Yes | Yes | Yes |
WLP3 | 4.815/4.795 | 122.30/121.8 | 3.275/3.265 | 83.18/82.93 | Yes | Yes | Yes | Yes | Yes | Yes |
PWF-Long | 4.755/4.740 | 120.78/120.4 | 3.635/3.620 | 92.33/91.95 | Yes | Yes | Yes | Yes | Yes | Yes |
PWF Short | 4.735/4.715 | 120.27/119.7 | 3.635/3.620 | 92.33/91.95 | Yes | Yes | Yes | Yes | Yes | Yes |
S-Gauge Core Bits | ||||||||||
SWF-Long | 5.755/5.740 | 146.18/145.8 | 4.447/4.432 | 112.95/112.5 | Yes | Yes | Yes | Yes | Yes | Yes |
SWF-short | 5.735/5.715 | 145.67/145.1 | 4.447/4.432 | 112.95/112.5 | Yes | Yes | Yes | Yes | Yes | Yes |
U-Gauge Core Bits | ||||||||||
UWF-Long | 6.880/6.860 | 174.75/174.2 | 5.515/5.495 | 140.08/139.5 | Yes | Yes | Yes | Yes | Yes | Yes |
UWF-Short | 6.855/6.825 | 174.12/173.3 | 5.515/5.495 | 140.08/139.5 | Yes | Yes | Yes | Yes | Yes | Yes |
Z-Gauge Core Bits | ||||||||||
ZWF-Long | 7.880/7 .860 | 200.15/199.6 | 6.515/6.495 | 165 48/164.9 | Yes | Yes | Yes | Yes | Yes | Yes |
ZWF-Short | 7.855/7.825 | 199.52/198.7 | 6.515/6.495 | 165.48/164.9 | Yes | Yes | Yes | Yes | Yes | Yes |
Notes
1. Imp. – Impregnated Diamond Type
2. S.S. – Surface Set Diamond Type
3. T.C. – Tungsten Carbide Type
4. PDC – Polycrystalline Diamond Compact Type
5. TSP – Thermally Stable Diamond Polycrystalline
6. E.P. – Electroplated Diamond Type
Any further information about the specification, after sale service, price, etc, please feel free to contact with us.
Product detail pictures:






Related Product Guide:
Our enterprise since its inception, usually regards product top quality as business life, repeatedly enhance manufacturing technology, make improvements to product excellent and continuously strengthen enterprise total high quality administration, in strict accordance with all the national standard ISO 9001:2000 for Wholesale Price 5 Inch Diamond Core Drill Bit - Core Drill Bit – Sinovo, The product will supply to all over the world, such as: Suriname, Liverpool, Uruguay, Due to the stability of our items, timely supply and our sincere service, we are able to sell our merchandise not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.

The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!

-
Massive Selection for Pull Behind Boom Lift - ...
-
Factory wholesale Diaphragm Wall Construction S...
-
Manufacturer for Interlocking Kelly Bar - Kell...
-
Quality Inspection for Auger Bit Tool - TR220W...
-
Wholesale Dealers of Flower Hole Digger - TR28...
-
Good quality 1 Hp Mud Pump Price - SHD26 horiz...