PriceList for Well Digging Rig - SNR400 Water Well Drilling Rig – Sinovo

Short Description:

Product Detail

Product Tags

Feedback (2)

We have state-of-the-art tools. Our products are exported towards the USA, the UK and so on, enjoying a fantastic reputation amongst customers for Underground Boring Equipment, Micro Bored Pile, Water Pump Boring Machine, Special emphasis on the packaging of products to avoid any damage during transportation,Detailed attention to the valuable feedback and suggestions of our esteemed clients.

PriceList for Well Digging Rig - SNR400 Water Well Drilling Rig – Sinovo Detail:

Video

Technical Parameters

Item	Unit	SNR400
Max drilling depth	m	400
Drilling diameter	mm	105-325
Air pressure	Mpa	1.2-3.5
Air consumption	m³/min	16-55
Rod length	m	4
Rod diameter	mm	89/102
Main shaft pressure	T	4
Lifting force	T	22
Fast lifting speed	m/min	29
Fast forwarding speed	m/min	56
Max rotary torque	N.m	8000/4000
Max rotary speed	r/min	75/150
Big secondary winch lifting force	T	－
Small secondary winch lifting force	T	1.5
Jacks stroke	m	1.6
Drilling efficiency	m/h	10-35
Moving speed	Km/h	2.5
Uphill angle	°	21
Weight of the rig	T	9.8
Dimension	m	6.21.852.55
Working condition	Unconsolidated formation and Bedrock
Drilling method	Top drive hydraulic rotary and pushing, hammer or mud drilling
Suitable hammer	Medium and high air pressure series
Optional accessories	Mud pump, Gentrifugal pump, Generator, Foam pump

Product Introduction

SNR400C

SNR400 drilling rig is a kind of medium and high efficient full hydraulic multifunctional water well drill rig for drilling up to 400m and is used for water well, monitoring wells, engineering of ground-source heat pump air-conditioner,blasting hole, bolting and anchor cable, micro pile etc. Compactness and solidity are the main characteristics of the rig which is designed to work with several drilling method: reverse circulation by mud and by air, down the hole hammer drilling, conventional circulation. It can meet the drilling demand in different geological conditions and other vertical holes.

Features and advantages

1. Full hydraulic control is convenient and flexible

The speed, torque, thrust axial pressure, reverse axial pressure, thrust speed and lifting speed of the drilling rig can be adjusted at any time to meet the requirements of different drilling conditions and different construction technologies.

2. Advantages of top drive rotary propulsion

It is convenient to take over and unload the drill pipe, shorten the auxiliary time, and is also conducive to follow-up drilling.

3. It can be used for multi-function drilling

All kinds of drilling techniques can be used on this kind of drilling machine, such as down the hole drilling, through air reverse circulation drilling, air lift reverse circulation drilling, cutting drilling, cone drilling, pipe following drilling, etc. The drilling machine can install mud pump, foam pump and generator according to the needs of users. The rig is also equipped with a variety of hoists to meet the different needs of customers.

4. High efficiency and low cost

Due to full hydraulic drive and top drive rotary propulsion, it is suitable for all kinds of drilling technology and drilling tools, with convenient and flexible control, fast drilling speed and short auxiliary time, so it has high operation efficiency. The down the hole hammer drilling technology is the main drilling technology of the drilling rig in the rock. The down the hole hammer drilling operation efficiency is high, and the single meter drilling cost is lower.

5. It can be equipped with high leg crawler chassis

The high outrigger is convenient for loading and transportation, and can be loaded directly without crane. Crawler walking is more suitable for muddy field movement.

6.Use of oil mist eliminator

Efficient and durable oil mist device and oil mist pump. In the process of drilling, the high-speed running impactor is lubricated all the time to extend its service life to a greater extent.

7. The positive and negative axial pressure can be adjusted

The best impact efficiency of all kinds of impactors has its best matching axial pressure and speed. In the process of drilling, with the increasing number of drill pipes, the axial pressure on the impactor is also increasing. Therefore, in the construction, the positive and negative axial pressure valves can be adjusted to ensure that the impactor can obtain more matching axial pressure. At this time, the impact efficiency is higher.

8. Optional rig chassis

The rig can be mounted on crawler chassis, truck chassis or trailer chassis.

Product detail pictures:

Related Product Guide:

Our commission should be to provide our customers and consumers with ideal top quality and aggressive portable digital products for PriceList for Well Digging Rig - SNR400 Water Well Drilling Rig – Sinovo, The product will supply to all over the world, such as: Canada, Germany, Brazil, If you are for any reason unsure which product to select, do not hesitate to contact us and we will be delighted to advise and assist you. This way we will be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We are looking for more and more customers to create the glorious future.

Drilled Well Pump