• facebook
  • youtube
  • WhatsApp
English

OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo

OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo Featured Image
  • OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo
  • OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo
  • OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo
  • OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo
  • OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo
  • OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo

Short Description:


+8613801057171

Product Detail

Product Tags

Related Video

Feedback (2)

With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and advancement, we will build a prosperous future with each other with your esteemed firm for Piling Work, Under Reamed Piles Are Normally Bored Piles, Engine Line Boring, We are going to provide most effective quality, quite possibly the most current market aggressive rate, for each and every new and outdated consumers with the most great environmentally friendly solutions.
OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo Detail:

Technical Parameters

Products Problems Settlement
Diamond core bit 1. Size, and/ or technical parameters (matrix etc.) are different Replace from the requirements of client’s purchase order. Replace
2. Thread can not fit clients barrel. Repair or replace
3. Break down a piece from matrix, and the volume of the piece exceed 2mm x 2mm x2mm, and such break is not Replace caused by drilling. Replace
4. Matrix falling not caused by drilling. Replace or return
5. Groove on matrix caused by manufacturer. Replace or return
6. Drilling speed is obvious slower than congener products caused by manufacturer. Replace, and each item quantity
does not exceed 3 pieces.
7. Bit life is obvious short caused by manufacturer.
8. Breaking down of matrix, falling matrix, groove and short bit life caused by operating reasons- drill rod sticking, premature failure of the bit crown and hole bottom not to be cleaned. Be excluded from Quality Guarantee
9. Short bit life and abrasion caused by drilling machine, drilling techniques or parameters.
10. Properly worn and the matrix is finished.
11. Thread damaged and distortion made by operator.
12. Body crack in drill. Replace or return

Dimensions of core bits

A-Gauge Core Bits
Size Outside diameter Inside diameter Availability
inch mm inch mm IMP. S.S. P.C. PDC TSP E.P.
WLA 1.880/1.870 47.75/47.50 1.607/1.057 27.10/26.85 Yes Yes Yes Yes Yes Yes
WLA-RSG 1.895/1.885 48.13/47.88 1.067/1.057 27.10/26.85 Yes Yes Yes Yes Yes Yes
AWG, AX 1.880/1.870 47.75/47.50 1.190/1.180 30.23/29.97 Yes Yes Yes Yes Yes Yes
AWM 1.880/1.870 47.75/47.50 1.190/1.180 30.23/29.97 Yes Yes Yes Yes Yes Yes
AWT 1.880/1.870 47.75/47.50 1.286/1.276 32.66/32.41 Yes Yes Yes Yes Yes Yes
LTK48 1.880/1.870 47.75/47.50 1.394/1.384 35.40/35.15 Yes Yes Yes Yes Yes Yes
B-Gauge Core Bits
WLB 2.350/2.340 59.69/59.44 1.438/1.428 36.52/36.27 Yes Yes Yes Yes Yes Yes
WLB-RSG 2.365/2.355 60.07/59.82 1.438/1.428 36.52/36.27 Yes Yes Yes Yes Yes Yes
WLB-2.400 2.045/2.395 61.09/60.83 1.438/1.428 36.52/36.27 Yes Yes Yes Yes Yes Yes
WLB3 2.350/2.340 59.69/59.44 1.325/1.315 33.65/33.40 Yes Yes Yes Yes Yes Yes
BWG, BX 2.350/2.340 59.69/59.44 1.660/1.650 42.16/41.91 Yes Yes Yes Yes Yes Yes
BWM 2.350/2.340 59.69/59.44 1.660/1.650 42.16/41.91 Yes Yes Yes Yes Yes Yes
BWT 2.350/2.340 59.69/59.44 1.755/1.745 44.58/44.32 Yes Yes Yes Yes Yes Yes
LTK60 2.350/2.340 59.69/59.44 1.742/1.732 44.25/44.00 Yes Yes Yes Yes Yes Yes
TBW 2.350/2.340 59.69/59.44 1.785/1.775 45.34/45.09 Yes Yes Yes Yes Yes Yes
N-Gauge Core Bits
WLN 2.970/2.960 75.44/75.19 1.880/1.870 47.75/47.50 Yes Yes Yes Yes Yes Yes
WLN-RSG 2.985/2.975 75.82/75.57 1.880/1.870 47.75/47.50 Yes Yes Yes Yes Yes Yes
WLN-3.032 3.037/3.027 77.14/76.89 1.880/1.870 47.75/47.50 Yes Yes Yes Yes Yes Yes
WLN2 2.970/2.960 75.44/75.19 2.000/1.990 50.80/50.55 Yes Yes Yes Yes Yes Yes
WLN2-RSG 2.985/2.975 75.82/75.57 2.000/1.990 50.80/50.55 Yes Yes Yes Yes Yes Yes
WLN3, NWLTT 2.970/2.960 75.44/75.19 1.780/1.770 45.21/44.96 Yes Yes Yes Yes Yes Yes
WLN3-RSG 2.985/2.975 75.82/75.57 1.780/1.770 45.21/44.96 Yes Yes Yes Yes Yes Yes
WLN3-3.032 3.037/3.027 77.14/76.89 1.780/1.770 45.21/44.96 Yes Yes Yes Yes Yes Yes
NMLC 2.970/2.960 75.44/75.19 2.052/2.042 52.12/51.87 Yes Yes Yes Yes Yes Yes
NWG, NX 2.970/2.960 75.44/75.19 2.160/2.150 54.86/54.61 Yes Yes Yes Yes Yes Yes
NWM 2.970/2.960 75.44/75.19 2.160/2.150 54.86/54.61 Yes Yes Yes Yes Yes Yes
NWT 2.970/2.960 75.44/75.19 2.318/2.308 58.87/58.62 Yes Yes Yes Yes Yes Yes
TNW 2.970/2.960 75.44/75.19 2.394/2.384 60.80/60.55 Yes Yes Yes Yes Yes Yes
H-Gauge Core Bits
WLH 3.770/3.755 95.76/95.38 2.505/2.495 63.63/63.38 Yes Yes Yes Yes Yes Yes
WLH-RSG 3.790/3.755 96.27/95.89 2.505/2.495 63.63/63.38 Yes Yes Yes Yes Yes Yes
WLH-3.830 3.840/3.825 97.54/97.16 2.505/2.495 63.63/63.38 Yes Yes Yes Yes Yes Yes
WLH-3.895 3.897/3.882 98.98/98.60 2.505/2.495 63.63/63.38 Yes Yes Yes Yes Yes Yes
WLH3, WLHTT 3.770/3.755 95.76/95.38 2.411/2.401 61.24/60.99 Yes Yes Yes Yes Yes Yes
WLH3-RSG 3.790/3.755 96.27/95.89 2.411/2.401 61,24/60.99 Yes Yes Yes Yes Yes Yes
WLH3-3.830 3.840/3.825 97.54/97.16 2.411/2.401 61.24/60.99 Yes Yes Yes Yes Yes Yes
WLH3-3.895 3.897/3.882 98.98/98.60 2.411/2.401 61.24/60.99 Yes Yes Yes Yes Yes Yes
HMLC 3.897/3.882 98.98/98.60 2.505/2.495 63.63/63.38 Yes Yes Yes Yes Yes Yes
HWF-Long 3.912/3.897 99.36/98.98 3.005/2.995 76.33/76.08 Yes Yes Yes Yes Yes Yes
HWF-Short 3.897/3.882 98.98/98.60 3.005/2.995 76.33/76.08 Yes Yes Yes Yes Yes Yes
HWG, HX 3.897/3.882 98.98/98.60 3.005/2.995 76.33/76.08 Yes Yes Yes Yes Yes Yes
HWM 3.897/3.882 98.98/98.60 3.005/2.995 76.33/76.08 Yes Yes Yes Yes Yes Yes
HWT 3.897/3.882 98.98/98.60 3.192/3.182 81.08/80.82 Yes Yes Yes Yes Yes Yes
P-Gauge Core Bits
WLP 4.815/4.795 122.30/121.8 3.350/3.340 85.09/84.84 Yes Yes Yes Yes Yes Yes
WLP3 4.815/4.795 122.30/121.8 3.275/3.265 83.18/82.93 Yes Yes Yes Yes Yes Yes
PWF-Long 4.755/4.740 120.78/120.4 3.635/3.620 92.33/91.95 Yes Yes Yes Yes Yes Yes
PWF Short 4.735/4.715 120.27/119.7 3.635/3.620 92.33/91.95 Yes Yes Yes Yes Yes Yes
S-Gauge Core Bits
SWF-Long 5.755/5.740 146.18/145.8 4.447/4.432 112.95/112.5 Yes Yes Yes Yes Yes Yes
SWF-short 5.735/5.715 145.67/145.1 4.447/4.432 112.95/112.5 Yes Yes Yes Yes Yes Yes
U-Gauge Core Bits
UWF-Long 6.880/6.860 174.75/174.2 5.515/5.495 140.08/139.5 Yes Yes Yes Yes Yes Yes
UWF-Short 6.855/6.825 174.12/173.3 5.515/5.495 140.08/139.5 Yes Yes Yes Yes Yes Yes
Z-Gauge Core Bits
ZWF-Long 7.880/7 .860 200.15/199.6 6.515/6.495 165 48/164.9 Yes Yes Yes Yes Yes Yes
ZWF-Short 7.855/7.825 199.52/198.7 6.515/6.495 165.48/164.9 Yes Yes Yes Yes Yes Yes

Notes

1. Imp. – Impregnated Diamond Type

2. S.S. – Surface Set Diamond Type

3. T.C. – Tungsten Carbide Type

4. PDC – Polycrystalline Diamond Compact Type

5. TSP – Thermally Stable Diamond Polycrystalline

6. E.P. – Electroplated Diamond Type

Any further information about the specification, after sale service, price, etc, please feel free to contact with us.

1.Packaging & Shipping 2.Successful Overseas Projects 3.About Sinovogroup 4.Factory Tour 5.SINOVO on Exihibition and our team 6.Certificats

FAQ

Q1: Are you a manufacturer, trading company or a third party?

A1: We are a manufacturer. Our factory is located in Hebei Province near the capital Beijing, 100km away from Tianjin port. We also have our own trading company.

Q2: Wonder if you accept small orders?

A2: Do not worry. Feel free to contact us. In order to get more orders and give our clients more convenience, we accept small orders.

Q3: Can you send products to my country?

A3: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q4: Can you do OEM for me?

A4: We accept all OEM orders, just contact us and give me your design. We will offer you a reasonable price and make samples for you ASAP.

Q5: What's your payment terms?

A5: By T/T, L/C AT SIGHT, 30% deposit in advance, balance 70% before shipment.

Q6: How can I place the order?

A6: First sign the PI, pay deposit, then we will arrange the production. After finished production you need to pay the balance. Finally we will ship the goods.

Q7: When can I get the quotation?

A7: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation, please call us or tell us in your mail, so that we could regard your inquiry priority.

Q8: Is your price competitive?

A8: Only good quality product we supply. Surely we will give you the best factory price based on superior product and service.

Product detail pictures:

OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo detail pictures

OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo detail pictures

OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo detail pictures

OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo detail pictures

OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo detail pictures

OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo detail pictures

Related Product Guide:
No matter new consumer or outdated shopper, We believe in lengthy expression and trusted relationship for OEM Manufacturer 110 Core Drill - Core Drill Bit – Sinovo, The product will supply to all over the world, such as: Nicaragua, Finland, Indonesia, We are confident that we are able to provide you with opportunities and will be a valuable business partner of you. We look forward to working with you soon. Learn more about the types of products that we work with or contact us now directly with your inquiries. You are welcome to contact us anytime!
    • The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
    5 Stars By Molly from Kyrgyzstan - 2017.04.18 16:45
    This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
    5 Stars By Gloria from Lahore - 2017.11.29 11:09

    RELATED PRODUCTS