Factory wholesale Water Well Drilling Contractors - SNR300 Water Well Drilling Rig – Sinovo

Short Description:

Product Detail

Product Tags

Feedback (2)

It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We're seeking forward in your check out for joint development for Bore Cutting Machine, Friction Kelly bar, Multi Boring, While using the improvement of society and economy, our corporation will retain a tenet of "Focus on trust, high quality the first", moreover, we count on to make a glorious long run with each and every customer.

Factory wholesale Water Well Drilling Contractors - SNR300 Water Well Drilling Rig – Sinovo Detail:

Video

Technical Parameters

Item	Unit	SNR300
Max drilling depth	m	350
Drilling diameter	mm	105-305
Air pressure	Mpa	1.2-3.5
Air consumption	m³/min	16-55
Rod length	m	6
Rod diameter	mm	89
Main shaft pressure	T	4
Lifting force	T	20
Fast lifting speed	m/min	24
Fast forwarding speed	m/min	47
Max rotary torque	N.m	8000/4000
Max rotary speed	r/min	60/120
Big secondary winch lifting force	T	－
Small secondary winch lifting force	T	1.5
Jacks stroke	m	1.6/1.4
Drilling efficiency	m/h	10-35
Moving speed	Km/h	2
Uphill angle	°	21
Weight of the rig	T	8.6
Dimension	m	6.41.852.55/6.21.852.2
Working condition	Unconsolidated formation and Bedrock
Drilling method	Top drive hydraulic rotary and pushing, hammer or mud drilling
Suitable hammer	Medium and high air pressure series
Optional accessories	Mud pump, Centrifugal pump, Generator, Foam pump

Product Introduction

SNR300 drilling rig is a kind of medium and high efficient full hydraulic multifunctional water well drill rig for drilling up to 300m and is used for water well, monitoring wells, engineering of ground-source heat pump air-conditioner, blasting hole, bolting and anchor cable, micro pile etc. Compactness and solidity are the main characteristics of the rig which is designed to work with several drilling method: reverse circulation by mud and by air, down the hole hammer drilling, conventional circulation. It can meet the drilling demand in different geological conditions and other vertical holes.

The rig can be either crawler, trailer or truck mounted and it can be personalized according to the various customers’ requirements. The drilling machine is driven by diesel engine, and rotary head is equipped with international brand low-speed and large-torque motor and gear reducer, feeding system is adopted with advanced motor -chain mechanism and adjusted by double speed. Rotating and feeding system are controlled by hydraulic pilot control which can achieve step-less speed regulation. Breaking out and in drill rod, leveling the whole machine, winch and other auxiliary actions are controlled by hydraulic system. The structure of rig is designed to reasonable, which is easy to operate and maintenance.

Features and advantages

The machine is equipped with Cummins engine or electric power as the client’s special request.

Hydraulic rotary head and break in-out clamp device, advanced motor- chain feeding system, and hydraulic winch are reasonable matched.

This rig can be used by two drilling method in set covering layer and stratum soil condition.

The rig can be either crawler, trailer or truck mounted, optional 6*4 or 6*6 heavy truck.

Conveniently equipped with air compressor and DTH hammer, it can be used to drill the hole in rock soil condition by air drilling method.

The rig is adopted with patent technology hydraulic rotating system, mud pump, hydraulic winch, which can be work with circulation drilling method.

Two-speed hydraulic regulation is used in rotating, thrusting, lifting system, which shall make drilling specification more match with well working situation.

Hydraulic system is equipped with separate air-cooled hydraulic oil cooler , also can install water cooler as client’s optional in order to ensure hydraulic system work continuously and efficiently under the high temperature weather conditions in different regions.

Four hydraulic support jacks can level rapidly undercarriage to ensure the drilling accuracy. The support jack extension as optional can be easy to make the rig load and unload on truck as Self-loading by itself, which save more transportation cost

Product detail pictures:

Related Product Guide:

We insist on offering high-quality creation with superior business enterprise concept, honest revenue plus the greatest and fast service. it will bring you not only the high quality solution and huge profit, but essentially the most significant is usually to occupy the endless market for Factory wholesale Water Well Drilling Contractors - SNR300 Water Well Drilling Rig – Sinovo, The product will supply to all over the world, such as: venezuela, Puerto Rico, UK, We can meet the various needs of customers at home and abroad. We welcome new and old customers to come to consult & negotiate with us. Your satisfaction is our motivation! Allow us to work together to write a brilliant new chapter!

Drill A Well In Your Backyard