Best-Selling Water Well Boring - SNR200 Water Well Drilling Rig – Sinovo Detail:
Video
Technical Parameters
|
Item |
Unit |
SNR200 |
|
Max drilling depth |
m |
240 |
|
Drilling diameter |
mm |
105-305 |
|
Air pressure |
Mpa |
1.25-3.5 |
|
Air consumption |
m3/min |
16-55 |
|
Rod length |
m |
3 |
|
Rod diameter |
mm |
89 |
|
Main shaft pressure |
T |
4 |
|
Lifting force |
T |
12 |
|
Fast lifting speed |
m/min |
18 |
|
Fast forwarding speed |
m/min |
30 |
|
Max rotary torque |
N.m |
3700 |
|
Max rotary speed |
r/min |
70 |
|
Big secondary winch lifting force |
T |
－ |
|
Small secondary winch lifting force |
T |
1.5 |
|
Jacks stroke |
m |
Low jack |
|
Drilling efficiency |
m/h |
10-35 |
|
Moving speed |
Km/h |
2.5 |
|
Uphill angle |
° |
21 |
|
Weight of the rig |
T |
8 |
|
Dimension |
m |
6.4*2.08*2.8 |
|
Working condition |
Unconsolidated formation and Bedrock |
|
|
Drilling method |
Top drive hydraulic rotary and pushing, hammer or mud drilling |
|
|
Suitable hammer |
Medium and high air pressure series |
|
|
Optional accessories |
Mud pump, Centrifugal pump, Generator, Foam pump |
|
Product Introduction
SNR200 full hydraulic drilling rig is characterized by small body and compact design. The small truck can be transported, which is more convenient to move and saves the cost. It is suitable for drilling in narrow ground. The drilling depth can reach 250 meters.
Features and advantages
1. Full hydraulic control is convenient and flexible
The speed, torque, thrust axial pressure, reverse axial pressure, thrust speed and lifting speed of the drilling rig can be adjusted at any time to meet the requirements of different drilling conditions and different construction technologies.
2. Advantages of top drive rotary propulsion
It is convenient to take over and unload the drill pipe, shorten the auxiliary time, and is also conducive to follow-up drilling.
3. It can be used for multi-function drilling
All kinds of drilling techniques can be used on this kind of drilling machine, such as down the hole drilling, through air reverse circulation drilling, air lift reverse circulation drilling, cutting drilling, cone drilling, pipe following drilling, etc. The drilling machine can install mud pump, foam pump and generator according to the needs of users. The rig is also equipped with a variety of hoists to meet the different needs of customers.
4. High efficiency and low cost
Due to full hydraulic drive and top drive rotary propulsion, it is suitable for all kinds of drilling technology and drilling tools, with convenient and flexible control, fast drilling speed and short auxiliary time, so it has high operation efficiency. The down the hole hammer drilling technology is the main drilling technology of the drilling rig in the rock. The down the hole hammer drilling operation efficiency is high, and the single meter drilling cost is lower.
3. It can be used for multi-function drilling
All kinds of drilling techniques can be used on this kind of drilling machine, such as down the hole drilling, through air reverse circulation drilling, air lift reverse circulation drilling, cutting drilling, cone drilling, pipe following drilling, etc. The drilling machine can install mud pump, foam pump and generator according to the needs of users. The rig is also equipped with a variety of hoists to meet the different needs of customers.
4. High efficiency and low cost
Due to full hydraulic drive and top drive rotary propulsion, it is suitable for all kinds of drilling technology and drilling tools, with convenient and flexible control, fast drilling speed and short auxiliary time, so it has high operation efficiency. The down the hole hammer drilling technology is the main drilling technology of the drilling rig in the rock. The down the hole hammer drilling operation efficiency is high, and the single meter drilling cost is lower.
Q1: Are you a manufacturer, trading company or a third party?
A1: We are a manufacturer. Our factory is located in Hebei Province near the capital Beijing, 100km away from Tianjin port. We also have our own trading company.
Q2: Wonder if you accept small orders?
A2: Do not worry. Feel free to contact us. In order to get more orders and give our clients more convenience, we accept small orders.
Q3: Can you send products to my country?
A3: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q4: Can you do OEM for me?
A4: We accept all OEM orders, just contact us and give me your design. We will offer you a reasonable price and make samples for you ASAP.
Q5: What's your payment terms?
A5: By T/T, L/C AT SIGHT, 30% deposit in advance, balance 70% before shipment.
Q6: How can I place the order?
A6: First sign the PI, pay deposit, then we will arrange the production. After finished production you need to pay the balance. Finally we will ship the goods.
Q7: When can I get the quotation?
A7: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation, please call us or tell us in your mail, so that we could regard your inquiry priority.
Q8: Is your price competitive?
A8: Only good quality product we supply. Surely we will give you the best factory price based on superior product and service.
Product detail pictures:
Related Product Guide:
We can easily usually fulfill our respected customers with our very good top quality, very good price tag and excellent support due to we have been more expert and much more hard-working and do it in cost-effective way for Best-Selling Water Well Boring - SNR200 Water Well Drilling Rig – Sinovo, The product will supply to all over the world, such as: Bangkok, Uganda, Puerto Rico, we always keep our credit and mutual benefit to our client, insist our high quality service to moving our clients. always welcome the our friends and clients to come and visit our company and guid our business, if you are interested in our products, you can also submit your purchase information online, and we will contact you immediately, we keep our highly sincere cooperation and wish everything in your side are all well.
By Ruby from French - 2018.06.30 17:29
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Mark from Barbados - 2017.11.12 12:31