Sales & Support: +86-10-51908781/51909163Email: info@sinovogroup.com
Full Hydraulic Single Rotary Head Water Well Drilling Rig
Home - Products - Water Well Drilling Rig - Full Hydraulic Single Rotary Head Water Well Drilling Rig
20190819115100_7730.jpg

Full Hydraulic Single Rotary Head Water Well Drilling Rig

Full Hydraulic Water Well Drilling Rig is a kind of medium and high efficient full hydraulic multifunctional water well drill rig for drilling up to 240m-1600m and is used for water well, monitoring wells, engineering of ground-source heat pump air-conditioner, blasting hole, bolting and anchor cable, micro pile etc.

We can design and manufacture drilling rigs and piling machine according to customers requirements.

Full Hydraulic Water Well Drilling Rig is a kind of medium and high efficient full hydraulic multifunctional water well drill rig for drilling up to 240m-1600m and is used for water well, monitoring wells, engineering of ground-source heat pump air-conditioner, blasting hole, bolting and anchor cable, micro pile etc. Compactness and solidity are the main characteristics of the rig which is designed to work with several drilling method: reverse circulation by mud and by air, down the hole hammer drilling, conventional circulation. It can meet the drilling demand in different geological conditions and other vertical holes.


The rig can be either crawler, trailer or truck mounted and it can be personalized according to the various customers’ requirements. The drilling machine is driven by diesel engine, and rotary head is equipped with international brand low-speed and large-torque motor and gear reducer, feeding system is adopted with advanced motor -chain mechanism and adjusted by double speed. Rotating and feeding system are controlled by
hydraulic pilot control which can achieve step-less speed regulation. Breaking out and in drill rod, leveling the whole machine, winch and other auxiliary actions are controlled by hydraulic system. The structure of rig is designed to reasonable, which is easy to operate and maintenance.
Features and advantages of


- The machine is equipped with Cummins engine or electric power as the client’s special request.
- Hydraulic rotary head and break in-out clamp device, advanced motor- chain feeding system, and hydraulic winch are reasonable matched.
- This rig can be used by two drilling method in set covering layer and stratum soil condition.
- The rig can be either crawler, trailer or truck mounted, optional 6*4 or 6*6 heavy truck.
- Conveniently equipped with air compressor and DTH hammer, it can be used to drill the hole in rock soil condition by air drilling method.
- The rig is adopted with patent technology hydraulic rotating system, mud pump, hydraulic winch, which can be work with circulation drilling method.
- Two-speed hydraulic regulation is used in rotating, thrusting, lifting system, which shall make drilling specification more match with well working situation.
- Hydraulic system is equipped with separate air-cooled hydraulic oil cooler , also can install water cooler as client's optional in order to ensure hydraulic system work continuously and efficiently under the high temperature weather conditions in different regions.
- Four hydraulic support jacks can level rapidly undercarriage to ensure the drilling accuracy. The support jack extension as optional can be easy to make the rig load and unload on truck as Self-loading by itself, which save more transportation cost

SNR200C Drilling Rig Technical parameters

Item Unit SNR200 SNR200S
Max drilling depth m 240 260
Drilling diameter mm 105-305 105-305
Air pressure Mpa 1.25-3.5 1.25-3.5
Air consumption m3/min 16-55 16-55
Rod length m 3 3
Rod diameter mm 89 89
Main shaft pressure T 4 4
Lifting force T 12 16
Fast lifting speed m/min 18 20
Fast forwarding speed m/min 30 40
Max rotary torque N.m 3700 4500/2250
Max rotary speed r/min 70 85/170
Big secondary winch lifting force T
Small secondary winch lifting force T 1.5 1.5
Jacks stroke m Low jack 1.3
Drilling efficiency m/h 10-35 10-35
Moving speed Km/h 2.5 2.5
Uphill angle ° 21 21
Weight of the rig T 8 7.23
Dimension m 6.4*2.08*2.8 4*1.35*2.15
Working condition Unconsolidated formation and Bedrock
Drilling method Top drive hydraulic rotary and pushing, hammer or mud drilling
Suitable hammer Medium and high air pressure series
Optional accessories Mud pump, Gentrifugal pump, Generator, Foam pump

SNR300C Drilling Rig Technical parameters

Item Unit SNR300 SNR300Mini SNR300S
Max drilling depth m 300 300 300
Drilling diameter mm 105-305 105-305 105-305
Air pressure Mpa 1.2-3.5 1.2-3.5 1.2-3.5
Air consumption m3/min 16-55 16-55 16-55
Rod length m 3 3 3
Rod diameter mm 89 89 89
Main shaft pressure T 5 4 4
Lifting force T 16 16 16
Fast lifting speed m/min 14 20 20
Fast forwarding speed m/min 21 40 40
Max rotary torque N.m 5600/2800 5600/2800 7000/3500
Max rotary speed r/min 56/112 85/170 67/134
Big secondary winch lifting force T
Small secondary winch lifting force T 1.5 1.5 1.5
Jacks stroke m 1.6 1.3 1.3
Drilling efficiency m/h 10-35 10-35 10-35
Moving speed Km/h 2.5 2.5 2.5
Uphill angle ° 21 21 21
Weight of the rig T 8 7.36 7.8
Dimension m 6.4*2.08*2.8 4*1.35*2.15 4*1.6*2.15
Working condition Unconsolidated formation and Bedrock
Drilling method Top drive hydraulic rotary and pushing, hammer or mud drilling
Suitable hammer Medium and high air pressure series
Optional accessories Mud pump, Gentrifugal pump, Generator, Foam pump

SNR400C Drilling Rig Technical parameters

Item Unit SNR400 SNR400Mini SNR400S SNR400SL
Max drilling depth m 400 400 400 400
Drilling diameter mm 105-305 105-325 105-325 105-325
Air pressure Mpa 1.2-3.5 1.2-3.5 1.2-3.5 1.2-3.5
Air consumption m3/min 16-55 16-55 16-55 16-55
Rod length m 3 3 6 6
Rod diameter mm 89/102 89/102 89/102 89/102
Main shaft pressure T 6 4 4 4
Lifting force T 18 18 18 18
Fast lifting speed m/min 20 23 23 23
Fast forwarding speed m/min 32 45 45 45
Max rotary torque N.m 7000/3500 7000/3500 7000/3500 7000/3500
Max rotary speed r/min 75/150 75/150 75/150 75/150
Big secondary winch lifting force T
Small secondary winch lifting force T 1.5 1.5 1.5 1.5
Jacks stroke m 1.6 1.3 1.6 Low jack
Drilling efficiency m/h 10-35 10-35 10-35 10-35
Moving speed Km/h 3 3 3 5
Uphill angle ° 21 21 21 21
Weight of the rig T 9.98 8 11/10.5 10.5
Dimension m 6.4*2.08*2.55 4*1.6*2.15 5.6*2.08*2.55
5.6*1.85*2.55
6.4*2.08*2.8
Working condition Unconsolidated formation and Bedrock
Drilling method Top drive hydraulic rotary and pushing, hammer or mud drilling
Suitable hammer Medium and high air pressure series
Optional accessories Mud pump, Gentrifugal pump, Generator, Foam pump

SNR500C Drilling Rig Technical parameters

Item Unit SNR500 SNR500L SNR500S SNR500SL
Max drilling depth m 500 500 500 500
Drilling diameter mm 105-400 105-400 105-400 105-400
Air pressure Mpa 1.2-3.5 1.2-3.5 1.2-3.5 1.2-3.5
Air consumption m3/min 16-55 16-55 16-55 16-55
Rod length m 3.5 4.5 6 6
Rod diameter mm 108 108 108 108
Main shaft pressure T 7 7 6 6
Lifting force T 20 20 25 25
Fast lifting speed m/min 23 23 18 18
Fast forwarding speed m/min 33 33 38 38
Max rotary torque N.m 8800/4400 8800/4400 8800/4400 8800/4400
Max rotary speed r/min 75/150 75/150 75/150 75/150
Big secondary winch lifting force T 2.5/4(Optional) 2.5/4(Optional)
Small secondary winch lifting force T 1.5 1.5 1.5 1.5
Jacks stroke m 1.6 1.6 1.6 Low jack
Drilling efficiency m/h 10-35 10-35 10-35 10-35
Moving speed Km/h 3 3 3 5
Uphill angle ° 21 21 21 21
Weight of the rig T 11.8 13 13.5 14
Dimension m 6.8*2.25*2.85 8.1*2.25*2.85 5.6*2.25*2.85 6.5*2.25*2.9
Working condition Unconsolidated formation and Bedrock
Drilling method Top drive hydraulic rotary and pushing, hammer or mud drilling
Suitable hammer Medium and high air pressure series
Optional accessories Mud pump, Gentrifugal pump, Generator, Foam pump

SNR600C Drilling Rig Technical parameters

Drill model SNR600C
Engine power KW 219
Max. drilling depth m 600
Drilling diameter mm Rock 200-350;soil500-1200
Working air pressure Mpa 1.05-2.46
The total gas consumption m3/min 16-30
Drilling efficiency m/h 10-25
Length of drill rod m 6
Drill pipe diameter mm ф108
Driven rod mm 108x108
Axial pressure KN 300
Lifting force KN 300
Slow forward,slow lift speed m/min 9.2
Fast forward,fast lift speed m/min 50
Power head rotary torque Nm 22000
Rotary speed rpm 0-50,0-100
Hydraulic mud pump L/min 600
Walking speed km/h 2
Gradeability ° 20
Total weight Kg 18500
Overal weight mm 9400x2100x3200

SNR800C Drilling Rig Technical parameters

Item Unit SNR800 SNR800 (Double cylinder) SNR800 (Triple cylinder)
Max drilling depth m 800 800 800
Drilling diameter mm 105-550 105-550 105-550
Air pressure Mpa 1.6-8 1.6-8 1.6-8
Air consumption m3/min 16-96 16-96 16-96
Rod length m 4.5 6 6
Rod diameter mm 114 114 114
Main shaft pressure T 8 8 8
Lifting force T 36 43 44
Fast lifting speed m/min 23 19 29
Fast forwarding speed m/min 36 38 42
Max rotary torque N.m 15000/7500 15000/7500 15000/7500
Max rotary speed r/min 71/142 71/142 71/142
Big secondary winch lifting force T 2.5/4(Optional)
Small secondary winch lifting force T 1.5 1.5 1.5
Jacks stroke m 1.7 1.7 1.7
Drilling efficiency m/h 10-35 10-35 10-35
Moving speed Km/h 5 5 5
Uphill angle ° 21 21 21
Weight of the rig T 17 17.5 18
Dimension m 8.8*2.25*3.1 6.2*2.25*2.85 6.2*2.25*2.85
Working condition Unconsolidated formation and Bedrock
Drilling method Top drive hydraulic rotary and pushing, hammer or mud drilling
Suitable hammer Medium and high air pressure series
Optional accessories Mud pump, Gentrifugal pump, Generator, Foam pump

SNR1000C Drilling Rig Technical parameters

Item Unit SNR1000 SNR1000 (Double cylinder) SNR1000 (Triple cylinder)
Max drilling depth m 1000 1200 1200
Drilling diameter mm 105-800 105-900 105-900
Air pressure Mpa 1.6-8 1.6-8 1.6-8
Air consumption m3/min 16-96 16-120 16-120
Rod length m 4.5 6 6
Rod diameter mm 114 114 114
Main shaft pressure T 11 10 11
Lifting force T 47 53 58
Fast lifting speed m/min 23 20 23
Fast forwarding speed m/min 33 37 33
Max rotary torque N.m 20000/10000 20000/10000 20000/10000
Max rotary speed r/min 70/140 70/140 70/140
Big secondary winch lifting force T 2.5/4(Optional)
Small secondary winch lifting force T 1.5 1.5 1.5
Jacks stroke m 1.7 1.7 1.7
Drilling efficiency m/h 10-35 10-35 10-35
Moving speed Km/h 5 5 5
Uphill angle ° 21 21 21
Weight of the rig T 17.5 18.5 19
Dimension m 8.8*2.25*3.2 6.2*2.25*3.2 6.2*2.25*3.2
Working condition Unconsolidated formation and Bedrock
Drilling method Top drive hydraulic rotary and pushing, hammer or mud drilling
Suitable hammer Medium and high air pressure series
Optional accessories Mud pump, Gentrifugal pump, Generator, Foam pump


SNR1200C Drilling Rig Technical parameters

Item Unit SNR1200 SNR1200S
Max drilling depth m 1200 1200
Drilling diameter mm 105-900 105-900
Air pressure Mpa 1.6-8 1.6-8
Air consumption m3/min 16-120 16-120
Rod length m 4.5 6
Rod diameter mm 127 127
Main shaft pressure T 13 11
Lifting force T 61 64
Fast lifting speed m/min 23 21
Fast forwarding speed m/min 34 41
Max rotary torque N.m 22000/11000 22000/11000
Max rotary speed r/min 66/133 66/133
Big secondary winch lifting force T 2.5/4(Optional)
Small secondary winch lifting force T 1.5 1.5
Jacks stroke m 1.7 1.7
Drilling efficiency m/h 10-35 10-35
Moving speed Km/h 3 3
Uphill angle ° 21 21
Weight of the rig T 22 25
Dimension m 9.6*2.6*3.8 6.5*2.6*3.8
Working condition Unconsolidated formation and Bedrock
Drilling method Top drive hydraulic rotary and pushing, hammer or mud drilling
Suitable hammer Medium and high air pressure series
Optional accessories Mud pump, Gentrifugal pump, Generator, Foam pump


SNR1600C Drilling Rig Technical parameters

Item Unit SNR1600 SNR1600L SNR1600S
Max drilling depth m 1600 1600 1600
Drilling diameter mm 105-1000 105-1000 105-1000
Air pressure Mpa 1.65-8 1.65-8 1.65-8
Air consumption m3/min 16-120 16-120 16-120
Rod length m 4.5 6 6
Rod diameter mm 127 127 127
Main shaft pressure T 16 13 13
Lifting force T 81 81 81
Fast lifting speed m/min 23 23 23
Fast forwarding speed m/min 37 44 44
Max rotary torque N.m 24500 24500 24500
Max rotary speed r/min 90 90 90
Big secondary winch lifting force T 2.5/4(Optional) 2.5/4(Optional)
Small secondary winch lifting force T 1.5 1.5 1.5
Jacks stroke m 1.7 1.7 1.7
Drilling efficiency m/h 10-35 10-35 10-35
Moving speed Km/h 3 3 3
Uphill angle ° 21 21 21
Weight of the rig T 30 32 30
Dimension m 8.6*2.6*3.5 10*2.6*3.5 8.6*2.6*3.5
Working condition Unconsolidated formation and Bedrock
Drilling method Top drive hydraulic rotary and pushing, hammer or mud drilling
Suitable hammer Medium and high air pressure series
Optional accessories Mud pump, Gentrifugal pump, Generator, Foam pump


Optional
Rig operation by truck or trailer or crawler Mast extension Breakout cylinder Air compressor
Centrifugal pump Mud pump Water pump Foam pump
RC pump Screw pump Drill pipe box Pipe loader arm
Opening clamp Support jack extension



Product List

Hot Products

TOP